Metal Plates ....for Inverted and Upright Microscopes
The Metal Plate creates a warm surface perfectly flush with the microscope stage. It employs a surface sensor to ensure the highest accuracy on temperature reading.
The Metal Plates require H401-T-CONTROLLER, which can control independently up to two devices.
Features
- Temperature range: from ambient to 60°C
- Temperature accuracy on specimen: ±0.3°C, after self calibration
- Specimen temperature within ±0.3°C, if room temperature remains within ±1°C
- Fits into the microscope XY stages and provides a metal and flat surface at controlled temperature
- Easy plate replacement, if necessary
- External T - sensor (included).
- On-board Data logging and download routines to USB drive.
- On-board logging of calibration and alarm events.
- Alarm buzzer and External Alarm Connector
- Self calibration routines allow to improve temperature accuracy.
Touch Pad Interface - Dual Channel
Beautifully designed, simple to use and very compact.
It can control up to 2 items.
Take advantage of the dual channel option
One channel controls the metal T-Pad.
The other channel controls the Glass Plate.
Data Logging
On-Board Data Logging - stored in local memory
A simple procedure allows to download data to USB.
Plates for Inverted / Upright microscopes
H401-NIKON-TI-SR-METALCompatibility: Nikon T/Ti-SR Circular Observation opening:24 mm Features: flush with the stage |
 |
H401-OLYMPUS-IX-SUSP-METALCompatibility: Olympus stages
Circular Observation opening:24 mm Features: flush with the stage |
 |
H401-K-FRAME-METAL-FLAT or H401-K-FRAME-METAL-RECESSEDCompatibility: Stages with K-frame insert (160x110mm)
Features:
|
  |
H401-K-FRAME-METAL-GLASSCompatibility: Stages with K-frame insert (160x110mm)
Features: flush with the stage
|
 |
H401-PRIOR H117-METAL-RECESSEDCompatibility: Prior H117 Features: recessed to provide the same focal plane as the stage |
 |
H401-NIKON-TI-S-ER-METALCompatibility: Nikon Ti-S-E or Ti-S-ER Observation opening: 24 mm diameter Features: recessed with respect to the rest of the stage to keep the same focal plane of the stage and compatible with oil immersion lenses |
 |
H401-NIKON-NI-S-E-METALCompatibility: for Nikon upright microscope Ecplipse with NI-S-E-motorized stage Observation opening: 27 mm diameter Features: flush with the stage |
 |
H401-UP-METALCompatibility: all the upright microscopes equippend with glass slide traslators Observation opening: 40x15 mm Features: flush with the stage |
 |
H401-T-CONTROLLER
2-Channel Temperature Controller with 4.3'' touch screen interface compatible with all H401 heating devices. One controller can control independently up to two items.
External temperature sensor (included) and self calibration routines allows easy calibration of the heating devices for the highest accuracy on sample temperature.
On board data logging and download procedures to USB drives allow to record temperature as a function of time and to log calibration events and alarms.
The controller is equipped with password protected routines to re-calibrate the sensors against certified thermometers.
Features
- T - range: from ambient to 60°C
- T - accuracy on specimen: ± 0.3°C
- External T - sensor (included).
- On-board Data logging and download routines to USB drive.
- On-board logging of calibration and alarm events.
- Alarm buzzer and External Alarm Connector
- One controllers can control independently up to two devices.
- Self calibration routines allow to improve temperature accuracy.
- Password protected procedure for periodic calibration against certified thermometer
- Integrated in third party software: Nikon NIS Elements; Metamorph; Micromanager
