CO2-O2-T-METER
CO2-O2-T-METER measures CO2 and O2 concentration in any volume, such as benchtop incubators. It can be connected to a thermistor, to provide also temperature measurements. The Controller features CO2 and O2 sensor and a suction pump. If the atmosphere inside the incubator is humid, CO2-O2-T-METER can be equipped with a drying unit to dehumidify the sample gas prior to performing the measurements.
- CO2 sensor: 10 year-life Non Dispersive InfraRed (NDIR) dual wave length detector
- CO2 range: 0-20%
- Accuracy: ± 0.1%
- O2 sensor: optical sensor - 5 years lifetime
- O2 range: 0-21%
- Accuracy: ± 0.1%
- Sensor calibration against external meter or calibration gas
- Build in suction pump allows to suck out the gas to perform the concentration measurements
- High efficiency dryer to dehumidify the gas for concentration measurement (needed only if gas in controlled volume is humid)
- On-board Data logging and download routines to USB drive.
- On-board logging of calibration and alarm events.
- Alarm buzzer and External Alarm Connector
- RS232 and Mini USB ports for data logging through Okolab DATA LOG software or any third party software via DLL
