Okolab - Home

Cage Incubator

Models for any microscope on the market

Stage Top Incubator

Environmental control right on the stage

UNO

Best quality to price ratio

Heating & Cooling

Water jacket stage top incubator

Glass T Plates

For inverted, upright and stereo micoscopes

H401-T-DUAL-BL+T-PLATE-GLASS-PLATE.png

Dual Controller

One controller drives two units

H401-T-DUAL-BL+H401-GLASS-PLATE_self_calibration.png

Self calibration

Automatic calibration routine

CO2 UNIT

Ideal for live cell imaging

Central CO2/O2 mixer

Ideal for facilities of MINI INCUBATORS

Manual GAS mixers

CO2, Hypoxia and Hyperoxia models

Microscope Incubators

IVF equipment

Gas Mixers

H301-OLYMPUS-IX3-SVR

Stage compatibility: screws onto Olympus IX3-SVR Stage

Magnetic inserts allow to use:

35/60 mm Petri
1x3 in. / 1x2 in. chambered slides
6-12-24-48-96 MW Plates (without addition of inserts)

Features:

Sliding lid for easy pipetting
Optional lids available for Kohler Illumination, Laser Safety, Injection during imaging
Flexible chamber height thanks to the removable chamber riser and the optional Koheler Lid
Magnets allow easy interchange of chamber inserts
Magnetic locks hold Petri, Slides and MW in correct position inside the chamber
Perfusion holes: 12 channels for 2.5mm O.D. tubings are available in the chamber riser

Available Inserts

6MW	6 well plates
12MW	12 well plates
24MW	24 well plates
24MW-NUNC	24-well NUNC/GREINER plates
48MW	48-well plates
96MW	96-well plates. Includes MW-OIL
MW-OIL	Open frame to image multi well plates with oil immersion objectives
1x35-M	#1 35mm Petri-dish
1xGS-M	#1 1x3in. chamberslide
1xLABTEK-M	#1 Lab-Tek 1x2 in. chambered cover glass
1xLABTEK-II-M	#1 Lab-Tek II 1x2 in. chambered cover glass
1x60-M	#1 60mm Petri-dish
1xT25-M	#1 Nunc and Greiner T25 flask
2x35-M	#2 35mm Petri-dish
2xGS-M	#2 1x3in. chamberslides
2xLABTEK-M	#2 Lab-Tek 1x2 in. chambered cover glass
2xLABTEK-II-M	#2 Lab-Tek II 1x2 in. chambered cover glass
2x60-M	#2 60mm Petri-dish
4x35-M	#4 35mm Petri-dish
GS35-M	#1 1x3in. chamberslide and #2 35mm Petri-dish
LABTEK-35-M	#1 Lab-Tek 1x2 in. chambered cover glass and #2 35mm Petri-dish
LABTEK-II-35-M	#1 Lab-Tek II 1x2 in. chambered cover glass and #2 35mm Petri-dish
LABTEK-60-M	#1 Lab-Tek 1x2 in. chambered cover glass and #1 60mm Petri-dish
LABTEK-II-60-M	#1 Lab-Tek II 1x2 in. chambered cover glass and #1 60mm Petri-dish
GS60-M	#1 1x3in. chamberslide and #1 60mm Petri-dish
6035-M	#1 60mm Petri-dish and #1 35mm Petri-dish

Available LIDs

H301-KOEHLER LID	Glass lid that reduces the height of the chamber and allows to work under Koehler illumination. Minimum condenser working distance (without chamber riser): 22mm
H301-INJECTION-LID	Glass lid with two small openings (sealed with flexible plastic) to allow injection or permanent access to the specimen Note: compatible only with specimen holder 1x35
H301-LASER-INTERLOCK-LID	Glass lid with a safety switch that connects to the laser box. The switch turns off the laser, when the lid is lifted Note: compatible only with specimen holder 1x35

H301-OLYMPUS-IX3-SVR-[SLIDING LID]_600x600.jpg — H301-OLYMPUS-IX3-SVR with Sliding Lid

H301-OLYMPUS-IX3-SVR-[KOEHLER LID]_600x600.jpg — H301-OLYMPUS-IX3-SVR with Koehler Lid

H301-OLYMPUS-IX3-SVR-[SLIDING LID]-[DIMENSIONS].jpg — H201-OLYMPUS-IX3-SVR with Sliding Lid - Dimensions TIPA plate adapter not reported

H301-OLYMPUS-IX3-SVR-[KOEHLER LID]-[DIMENSIONS]_600x600.jpg — H301-OLYMPUS-IX3-SVR with Koehler Lid - Dimensions TIPA plate adapter not reported

H301-OLYMPUS-IX3-SVR-[6MW]_600x600.jpg — H301-OLYMPUS-IX3-SVR - 6 MW Plate - requires chamber riser

H201-OLYMPUS-IX3-SVR - Magnetic insterts

H301-OLYMPUS-IX3-SVR - Magnetic sample locks

H301-OLYMPUS-IX-SUSP

Stage compatibility: screws onto IX-SUSP, GX-SVR, GX-SFR, BX3-SSU, IX2-SFR, IX2-SVL-2 - comes with Sliding Lid

Magnetic inserts allow to use:

35/60 mm Petri
1x3 in. / 1x2 in. chambered slides

Features:

Sliding lid for easy pipetting
Optional lids available for Kohler Illumination, Laser Safety, Injection during imaging
Flexible chamber height thanks to the removable chamber riser and the optional Koheler Lid
Magnets allow easy interchange of chamber inserts
Magnetic locks hold Petri and Slides in correct position inside the chamber
Perfusion holes: 8 channels for 2.5mm O.D. tubings are available in chamber riser.

Available Inserts

1x35-M single	#1 35mm Petri-dish
1xGS-M-single	#1 1x3in. chamberslide
1xLABTEK-M-single	#1 Lab-Tek 1x2 in. chambered cover glass
1xLABTEK-II-M-single	#1 Lab-Tek II 1x2 in. chambered cover glass
1x60-M-single	#1 60mm Petri-dish

Available LIDs

H301-KOEHLER LID-2	Glass lid that reduces the height of the chamber and allows to work under Koehler illumination. Minimum condenser working distance (without chamber riser): 22mm
H301-INJECTION-LID-2	Glass lid with two small openings (sealed with flexible plastic) to allow injection or permanent access to the specimen. Compatible only with specimen holder 1x35
H301-LASER-INTERLOCK-LID-2	Glass lid with a safety switch that connects to the laser box. The switch turns off the laser, when the lid is lifted. Compatible only with specimen holder 1x35

H301-OLYMPUS-IX-SUSP- Dimensions with Sliding Lid

H301-OLYMPUS-IX-SUSP- Dimensions with Koehler Lid

H301-PRIOR-NZ500

Stage compatibility: fits on Prior NZ500 piezo Z-stages

The chamber can fit:

35/60 mm Petri
1x3 in. / 1x2 in. chambered slides
6-12-24-48-96 MW plates (without addition of inserts)

Features:

Uniformly heated by means of embedded electric resistances and is covered with a temperature controlled conductive glass lid
Magnets allow easy interchange chamber insert
Magnetic locks hold Petri, Slides in correct position inside the chamber
Perfusion holes: channels for 2.5 mm O.D. tubings are available in chamber riser
Removable riser to fit standard multiwell plates or to perform perfusion

H301-UP

Stage compatibility: fits on Upright Microscopes

Part number of the objectives in use must be specified in purchase order
XY stage model and serial number must be specified in purchase order

The chamber can fit:

35/60 mm Petri
1x3 in. / 1x2 in. chambered slides

Features:

Suitable for dipping lens
Manageable chamber thanks to the opening of the lid to introduce the objective
Magnets allow easy interchange chamber insert
Magnetic locks hold Petri, Slides in correct position inside the chamber
Perfusion holes: 12 channels for 2.0 mm O.D. tubings are available
To control the humidity into the chamber humidity module is recommended: HM-ACTIVE

Available Inserts

UP-1x35-M	#1 35mm Petri-dish
UP-1xGS-M	#1 1x3 in. chamber slide
UP-1xLABTEK-M	#1 Lab-Tek 1x2 in. chambered cover glass
UP-1xLABTEK-II-M	#1 Lab-Tek II 1x2 in. chambered cover glass
UP-1x60-M	#1 60mm Petri-dish

H301-UP-[Exploded-OPEN]_600x600.jpg — H301-UP - Components

H301-UP-[ADAPTERS-1]_600x600.jpg — H301-UP - Available inserts

H301-UP-[LID-STANDARD]-[DIMENSIONS]_600x600.jpg — H301-UP - Dimensions

H301-PRIOR-NZ100-H117

Stage compatibility: fits on Prior NZ100/200 in Prior H117

The chamber can fit:

35/60 mm Petri
1x3 in. chambered slides

Features:

The chamber hosts #1 35mm petri or #1 chamber slide
Flexible chamber height thanks to the removable chamber riser required to perform perfusion
Perfusion holes: 12 channels for 2.5mm O.D. tubings are available in chamber riser

Available Drawings

H301-PRIOR-NZ100-H117_600x600 (2).JPG — H301-PRIOR-NZ100-H117 - 3D View

H301-PRIOR-NZ100-H117-[DIMENSIONS]_600x600.jpg — H301-PRIOR-NZ100-H117 - Dimensions